CIRCULAR PULL-OUT FITTING FOR CORNER BASE CABINETS
Availabe in the RH and LH version. This product’s key feature is that any type
of door panel can be mounted on the mechanism. This allows the kitchen’s
stylistic line to be maintained even in its corner cabinets. The twister can
be installed on corner base cabinets with doors of 450, 500 and 600 mm.
The slides load capacity is 15 kg. Slowmotion in closing.

CIRCULAR PULL-OUT FITTING FOR CORNER BASE CABINETS
Corner unit for kitchen furniture equipment. Easy opening and closing system.
Load capacity of 20 kg for each basket. Baskets in melamine.
Slowmotion in opening and closing.
Chromed Round Wire With White Wooden Bottom & White Frame

PULL-OUT PANTRY UNIT FOR CORNER CABINETS
Available in right-hand and left-hand preassembled versions for quick, easy
installation. Internal baskets pull out individually for easier removal of contents.
The door position has three-way adjustment. Complete with drilling template
and assembly instructions. Baskets available in standard version or with
safety glass bottom. Slowmotion in opening and closing.
Loading capacity front baskets 7+7 kg. Loading capacity rear baskets 9+9 kg.

RESIN 3/4 REVOLVING STRUCTURE WITH WIRE RING
Injection-moulded with nitrogen for impressive rigidity and lightness.
Capacity 20 kg.

RESIN SEMI-REVOLVING SHELF WITH WIRE RING
Injection-moulded with nitrogen for impressive rigidity and lightness.
Capacity 20 kg. Kit includes 2 pcs and includes the fixing brackets to the
cabinet (packaging includes 2 pcs).

REVOLVING PANTRY UNIT
Available for installation both on cabinets with right-hand and with left-hand
door. Complete with hole drilling diagram and assembly instructions. For
cabinets 450 and 600 mm wide. Three different heights for base cabinets:
4 levels, 5 levels, 6 levels.
For cabinets 900 and 1200 mm wide, use 2 pieces with width 375 and 525
mm respectively. Runner capacity: 40 kg.

PULL-OUT PANTRY UNIT (ADJUSTABLE HEIGHT)
With total extraction runners. Load capacity 120 kg. Double slowmotion system.

HANDY PULL-OUT CUTLERY RACK
Fully pull-out runners with slowmotion system. Capacity 30 Kgs.
Door fixed and adjusted by means of resin brackets.
Only available in Crominox® finish.

Base pull-out with side frame
■ Full extension runners with soft-close system as standard
■ Three-dimensional adjustment of the door
■ Total load capacity: 20 kg
■ Maximum load per basket: 10 kg
■ Reversible, it can be mounted on the right or left side of the cabinet
■ Installation depth: 489 mm
■ Installation height: 636 mm

3-BIN PULL-OUT WASTE UNIT
Wire structure. Mounted on runners with extended partial extraction, with
slowmotion system.
Separate removable bins for recycling.
Capacity: 8 + 8 + 18 Liters

PULL-OUT WASTE BIN AND ACCESSORY RACK KIT
FOR UNDER-SINK CABINET
The product’s main feature is that through a turn-and slide movement, the buckets
and accessory racks can be completely extracted, allowing full access to the
person working at the sink.
When used separately, the mechanisms can be installed on 450 and 600 mm
base cabinets, and above all in kitchen corners, for the most efficient access
to or storage of items in everyday use.

DRAINER
Made in AISI 201 stainless steel it is classy, functional and solid.
Thanks to the spring-loaded pins it allows an easy and fast installation.
The plate rack is made of a single unique piece.

WALL CABINET SYSTEM
Structure in sheet metal with bonded epoxy powder paint finish.
Vertical motion run 340 mm.
Net load capacity 4 kg per shelf.